Follow these instructions to get carving quicker!

Follow the manufacturer's operation and safety instructions for your drill to insert and tighten the Pumpkin Gutter shaft into the drill chuck, like you would a drill bit.

Cut and remove the lid of the pumpkin.

Have an assistant secure the pumpkin by holding onto the exterior. They should wear gloves and keep their hands well away from the opening and the Pumpkin Gutter.

With the drill on a medium speed, insert the Pumpkin Gutter ball end into the pumpkin. Lightly go over all interior surfaces to loosen the seeds and strings. Go to Photos and Videos to view the gutter being used.

Note: Strings may wrap around the Pumpkin Gutter shaft. With the drill off, remove the shaft from the drill and slide the strings off of the end of the shaft.

Occasionally turn off the drill and empty the loose seeds and strings. Once the seeds and strings are gone, use the same process to remove excess wall thickness.

Repeat until the walls are approximately 1" thick. This will make your pumpkin much easier to carve. Get Carving Quicker!

For safe Halloween fun, The Pumpkin Gutter is intended for adult use only. Do not wear loose clothing or jewelry. Contain long hair, keep yourself and others away from moving parts. Always wear eye protection. Blades are sharp, use caution when holding.